Inductive sensor NCN30-U1-Z2
General specifications | ||
|---|---|---|
| Switching function | Normally open/closed (NO/NC) | |
| Output type | Two-wire | |
| Rated operating distance | 30 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 … 24.3 mm | |
| Actual operating distance | 27 … 33 mm typ. 30 mm | |
| Reduction factor rAl | 0.45 | |
| Reduction factor rCu | 0.42 | |
| Reduction factor r304 | 0.79 | |
| Output type | 2-wire | |
Nominal ratings | ||
| Operating voltage | 5 … 60 V | |
| Switching frequency | 0 … 150 Hz | |
| Hysteresis | 1 … 10 typ. 5 % | |
| Reverse polarity protection | reverse polarity tolerant | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 5 V | |
| Voltage drop at IL | Â | |
| Â | Voltage drop ILÂ = 20Â mA, switching element on | 3.4 … 5 V typ. 4.3 V |
| Operating current | 2 … 200 mA | |
| Lowest operating current | 2 mA | |
| Off-state current | 0 … 1 mA typ. 0.7 mA | |
| Time delay before availability | ≤ 100 ms | |
| Switching state indicator | LED, yellow | |
Compliance with standards and directives | ||
| Standard conformity | Â | |
| Â | Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
Ambient conditions | ||
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
| Storage temperature | -25 … 85 °C (-13 … 185 °F) | |
Mechanical specifications | ||
| Connection type | screw terminals | |
| Core cross section | up to 2.5 mm2 | |
| Housing material | PBT | |
| Sensing face | PBT | |
| Degree of protection | IP68 | |
| Dimensions | Â | |
| Â | Height | 40 mm |
| Â | Width | 40 mm |
| Â | Length | 118 mm |
Â







