Dual setpoint value can be selected. PT100 ,J, K, L, T, S, R sensor (thermocouple) types can be selected. 0-20mA, 4-20mA, 0-10V, 2-10V, 0-25mV and 0-50mV input selections.
Characteristics
- Three different feature can be assigned to digital input.
- Three different feature can be assigned to F function key.
- Soft-Start feature.
- Analogue, SSR or Relay Output Control selection.
- 0-20mA and 4-20mA Analogue Output Control selection.
- Up to 16 steps Profile Control..
Environmental Conditions | |
| Ambient/Storage Temperature | 0…50 ºC / -25…70 ºC |
| Relative Humidity | 80% relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C |
| Protection Degree | According to EN 60529 Front panel: IP65, Rear panel: IP20 |
| Height | Max. 2000m |
| Electrical Characteristics | |
| Supply | 90-250V AC 50/60Hz or 10-30V DC / 8-24V AC |
| Power Consumption | 5VA |
| External Connections | Plug-in terminals |
| Scale | Pt-100 resistance thermometer -199.9…600.0 °C / -200…600 °C J (Fe-Const) thermocouple -30.0….600.0 °C / -30….600°C K (NiCr-Ni) thermocouple -30.0…999.9 °C / -30…1300°C L (Fe-CuNi) thermocouple -30.0….600.0 °C / -30….600°C T (Cu-CuNi) thermocouple -30.0…400.0 °C / -30….400°C S (Pt10Rh-Pt) thermocouple -40…1700 °C R (Pt13Rh-Pt) thermocouple -40…1700 °C 0-20mA, 4-20mA, 0-10V, 2-10V, 0-25mV, 0-50mV inputs -1999…9999 (max. scale range 10000) |
| Accuracy | Resistance thermometer 0-20mA, 4-20mA, 0-10V, 2-10V, 0-25mV, 0-50mV inputs: ±0.2% (of full scale) ± 1 digit Thermocouples: ±0.5% (of full scale) ± 1 digit |
| Line Resistance | Max. 100ohm for thermocouple, max. 20ohm for 3-wired Pt-100 |
Output | |
| C/A2 Output | Relay: 250V AC, 2A (for resistive load), NO+NC (selectable as control or Alarm2 output) |
| A1 Output | Relay: 250V AC, 2A ( for resistive load), NO (selectable as Alarm1 and cooling control output) |
| ANL/SSR Output | Max. SSR Output: 0-20mA, 4-20mA, 24V 20mA. Max. load resistance: 600ohm (12 bit 0,2% accuracy) |
| Life Expectancy | Mechanical 30.000.000 operations (under no load), Electrical 300.000 operations (2A at 250V AC, resistive load) |
Control | |
| Control Type | Single set-point and alarm control |
| Control Algorithm | On-Off, P, PI, PD, PID (selectable) |
| A/D Converter | 14 bit |
| Sampling Time | 100ms |
| Proportional Band | Adjustable between 0.0% and 100.0%. If Pb=0.p%, On-Off control is selected |
| Control Period | Adjustable between 1 and 125s |
| Hysteresis | Adjustable between 1 and 50 °C/F |
| Output Power | The ratio of power at a set point can be adjusted between 0% and 100% |
Housing | |
| Mounting Method | Panel mounting |
| Dimensions | W48xH48xD87 mm |
| Weight | Approx. 250g (after packaging) |
| Enclosure Material | Self extinguishing plastics |
Data Sheet
Temp Controller
Temp Controller
622 KB
No products in the cart.