Name: PF | Sensor Inductive Type NBN40-L1-E2-V1
Brand: Pepperl+Fuchs
SKU: NBN40-L2-E2-V1
Availability: InStock

PF | Sensor Inductive Type NBN40-L1-E2-V1

in Pepperl+Fuchs

Sku: NBN40-L2-E2-V1

₨ 8,000

In stock

Description

Inductive sensor NBN40-L1-E2-V1

General specifications
Switching function	Normally open (NO)
Output type	PNP
Rated operating distance	40 mm
Installation	non-flush
Output polarity	DC
Assured operating distance	0 … 32.4 mm
Actual operating distance	36 … 44 mm
Reduction factor r _Al	0.33
Reduction factor r _Cu	0.31
Reduction factor r ₃₀₄	0.74
Reduction factor r _Brass	0.38
Output type	3-wire
Nominal ratings
Operating voltage	10 … 30 V DC
Switching frequency	0 … 180 Hz
Hysteresis	typ. 5 %
Reverse polarity protection	reverse polarity protected
Short-circuit protection	pulsing
Voltage drop	≤ 2 V
Operating current	0 … 200 mA
Off-state current	0 … 0.5 mA
No-load supply current	≤ 20 mA
Time delay before availability	80 ms
Operating voltage indicator	LED, green
Switching state indicator	LED, yellow
Functional safety related parameters
MTTF _d	1510 a
Mission Time (T _M)	20 a
Diagnostic Coverage (DC)	0 %
Compliance with standards and directives
Standard conformity
Standards	EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Approvals and certificates
Protection class	II
Rated insulation voltage	253 V
Rated impulse withstand voltage	4000 V
UL approval	cULus Listed, General Purpose
CCC approval	CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature	-25 … 85 °C (-13 … 185 °F)
Storage temperature	-40 … 85 °C (-40 … 185 °F)
Mechanical specifications
Connection type	Connector plug M12 x 1 , 4-pin
Housing material	PA
Sensing face	PA
Degree of protection	IP68 / IP69K
Cable
Cable diameter	3.3 mm ± 0.15 mm
Mass	130 g
Dimensions
Height	40 mm
Width	40 mm
Length	67 mm