Name: PF | Sensor Inductive Type NJ30-U1-W
Brand: Pepperl+Fuchs
SKU: NJ30-U1-W
Availability: InStock

PF | Sensor Inductive Type NJ30-U1-W

₨ 8,500

In stock

Inductive sensor NJ30+U4+W

General specifications
Switching function		Normally open/closed (NO/NC)
Output type		Two-wire
Rated operating distance		30 mm
Installation		non-flush
Output polarity		AC
Assured operating distance		0 … 24.3 mm
Actual operating distance		27 … 33 mm typ. 30 mm
Reduction factor r_Al		0.45
Reduction factor r_Cu		0.4
Reduction factor r₃₀₄		0.8
Output type		2-wire
Nominal ratings
Operating voltage		20 … 253 V ¹⁾
Switching frequency		0 … 20 Hz
Hysteresis		1 … 10 typ. 5 %
Voltage drop		≤ 5 V
Voltage drop at I_L
	Voltage drop I_L = 10mA, switching element on	6 … 11 V typ. 9 V
	Voltage drop I_L = 20mA, switching element on	5 … 9.5 V typ. 8 V
	Voltage drop I_L = 50mA, switching element on	4 … 7.5 V typ. 6.8 V
	Voltage drop I_L = 100mA, switching element on	4 … 7 V typ. 6.5 V
	Voltage drop I_L = 200mA, switching element on	4 … 7 V typ. 6.5 V
	Voltage drop I_L = 200mA, T_U = 23° C, switching element on	4 … 7 V typ. 6 V
	Voltage drop I_L = 500mA, switching element on	4 … 7 V typ. 6 V
Momentary current (20 ms, 0.1 Hz)		0 … 3000 mA
Operating current		8 … 500 mA
Off-state current		0.5 … 1.95 mA typ. 1.2 mA
	Off-state current U_B 24 V, switching element off	0.5 … 1.7 mA typ. 1.2 µA
Time delay before availability		≤ 70 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Compliance with standards and directives
Standard conformity
	Standards	EN 60947-5-2:2007 IEC 60947-5-2:2007
Approvals and certificates
CCC approval		Certified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature		-25 … 70 °C (-13 … 158 °F)
Storage temperature		-25 … 85 °C (-13 … 185 °F)
Mechanical specifications
Core cross section		up to 2.5 mm²
Housing material		PBT
Sensing face		PBT
Degree of protection		IP68
Dimensions
	Height	40 mm
	Width	40 mm
	Length	118 mm
Note		¹⁾ In the temperature range below 0 °C, permissible operating voltage U_b 80…253 V Safety fuse ≤ 2 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly.