9 Results

Sort by:
  • Application
    • Pressure transmitters are used to measure pressures in liquids and gases. The pressure is converted into an electrical signal.
    Special advantages are:
    • compact construction
    • built-in amplifier
    • large output signal
    • advantageous price/performance
    • ratio largely compatible with fluids
    Sku: JUMO-4341-Series-0-to-4

    JUMO 4341 Series Pressure Transmitter ( 0 to 4 Bar )

     20,000
  • Measurement range-specific configuration and amplification for maximum precision, even within narrow measurement ranges Also for 3-wire systems (BU) with voltage output Analogue constant measurement for extremely quick response time upon temperature change Interference-resistant, low-noise current / voltage signal Detection of sensor and cable breakage in accordance with Namur NE 43 EMC according to EN 61326 Type J = J head assembly Type B = B head assembly
    Sku: dTRANS-T03

    Jumo dTrans T03 Temperature Transmitter PT100 Input

     2,000
  • Description

    The transmitters record sensor signals from RTD temperature probes, thermocouples, resistance transmitters, or resistors/potentiometers. When using a resistor/potentiometer or RTD temperature probe, the sensor connection on the input side can be connected with a two-wire, three wire, or four-wire circuit. Voltage signals in the range from -100 to +1100 mV can also be recorded. Depending on the selected measurement input, the linear and temperature-linear linearization variants and the possibility of easily configurable customer-specific linearization are available. Type 707050 delivers 4 to 20 mA as an output signal. Type 707051 delivers 4 to 20 mA or 0 to 10 V as an output signal. The measurement input and the output signal are galvanically isolated from one another. The output signal can be reversed for both types. The transmitter configuration with respect to probe type, connection technology of the probe, measuring range (user configurable), and linearization is carried out by a setup program on the PC. The connection to the PC is established via a USB interface which does not require additional auxiliary voltage. Via the USB interface, the min./max. process value and the min./max. operating temperature recorded by the transmitter can be read and the sensor wiring can be checked online. The operating status of the transmitter is indicated by a two-color control LED (red/green). The control LED is lit green during malfunction-free operation. A fault such as a probe break will be shown by the corresponding LED signaling
    Sku: dTRANS T05 T

    Jumo dTrans T05 Temperature Transmitter PT100 Input, 11 → 35 V

     1,500
  • Applications
    • compressors
    • machinery and plant engineering
    • industrial pneumatics
    • commercial vehicles
    • building technology
    Brief description This pressure transmitter is used as the core product for the MIDAS range for applications requiring reliable implementation of measuring tasks with long-term stability and excellent price performance ratio. The MIDAS range provides solutions for all applications on the basis of this core product. The innovative and patented sensor design of the specifically developed ceramic sensor provides excellent long-term stability of < 0.2 %. It can be used for recording relative pressures of 1.6 bar to 60 bar in gaseous or liquid media.

    JUMO MIDAS C08 OEM-Pressure Transmitter ( 401002 )

     7,000 15,000
     7,000 15,000 Select options
  • Features

    • High chemical resistance
    • Measuring system resistant to high mechanical loads
    • Measuring ranges: 0 to 100 bar up to 0 to 400 bar relative pressure
    • Thin-film technology
    • Welded measuring system
    • Compact design: as of 57 mm in length
    • High bursting strength

    Customer benefits

    • Economical Type 401005 is the high-pressure model in the JUMO MIDAS pressure transmitter range, with sensor technology that has been proven thousands of times over. An almost fully automated production sequence (digital compensation and calibration of the sensor module) reduces the production time and manufacturing costs.
    • Process reliability The high quality of every pressure transmitter is ensured by the full final inspection within the fully automatic measuring and calibration facility.
    • Versatile This measuring instrument distinguishes itself through its versatility. Various output signals, different process connections, materials for process connections, and sealing material are available. The standardized features are specified in the data sheet; further features can be implemented upon request.

    Applications

    • Refrigeration technology
    • Compressors
    • Commercial vehicles
    • Hydraulics

    JUMO MIDAS High pressure OEM-Pressure Transmitter ( 401005 )

     20,000 31,000
     20,000 31,000 Select options
  • Applications
    • Compressors
    • Mechanical and plant engineering
    • Industrial Pneumatics
    • Commercial vehicles
    • Building technology
    • Special features
    • From 0 to 1,6 bar up to 0 to 100 bar, relative pressure
    • Elastomer-sealed
    • Compact design: from 58 mm length
    • High chemical resistance
    • High mechanical strength membrane
      Description The pressure transmitter is used for pressure measurement of liquid and gaseous media. With the well proofed ceramic thick film sensor, the pressure is measured, converted into an electrical standard signal (voltage or current) and output via electrical connections, e.g. line socket, M12 plug connector or attached cable. A large number of process connections are available for adaptation to the process.
    Sku: MIDAS-401001

    JUMO MIDAS OEM-Pressure Transmitter ( 401001 )

     6,000 30,000
     6,000 30,000 Select options
  • This pressure transmitter acquires the relative and absolute pressure. The measuring system is fully welded and can be used for all media. The silicon sensor is resistant to overloading even in the lowest measuring ranges. It is mainly used in mechanical and plant engineering and is also suitable for hydrogen applications in electrolyzers, synthesis plants, and mobile fuel cells. Applications
    • HVAC (Heating, Ventilating and Air Conditioning)
    • Refrigeration
    • Compressor construction
    • Machine and plant engineering
    • Packaging industry

    JUMO MIDAS S05 OEM-Pressure Transmitter Universal ( 401010 )

     7,000 10,000
     7,000 10,000 Select options
  • Applications • HVAC (heating, ventilating, and air conditioning) • Filter technology • Mechanical and plant engineering • Level measurement • Bubble-through method • Packaging industry Description The JUMO MIDAS S06 pressure transmitter is already available with measuring ranges as of 100 mbar. The used silicon sensor can handle extreme overloading even in the lowest measuring ranges and is capable of handling millions of pressure cycles. The fully welded and therefore seal-free measuring system made of high-grade stainless steel allows this device to be used in almost all media, even when the conditions are rough. The structure ensures optimum protection against process medium leakage. Customer benefits • Economic A high degree of automation (digital compensation and calibration of sensor module) reduces production time and manufacturing costs. • Process reliability The piezoresistive silicon sensor has a high level of overload protection and long-term stability. The full final inspection in the fully automated measuring and calibration facility ensures that each pressure transmitter is of high quality. • Time-saving, uncomplicated, and versatile The installation of the measuring device requires little work and the electrical installation is simple. The modular structure allows universal use in almost any application.

    JUMO MIDAS S06 Transmitter Low Pressure Application ( 401011 )

     6,000 8,000
     6,000 8,000 Select options
  • Features

    • Measuring ranges: 0 to 250 mbar up to 0 to 1.6 bar relative pressure, 0 to 600 mbar up to 0 to 25 bar absolute pressure
    • Silicon sensor with stainless steel separating diaphragm
    • Welded measuring system
    • Compact design: as of 71 mm in length
    • High bursting strength

      Customer benefits

      • Economical Type 401006 is based on the sensor technology of the JUMO MIDAS pressure transmitter range, which has been proven thousands of times over. An almost fully automated production process (digital compensation and calibration of the sensor module) reduces production time and manufacturing costs.
      • Process reliability The high quality of every pressure transmitter is ensured by the full final inspection within the fully automatic measuring and calibration facility. The process is guaranteed in the first instance by a high burst pressure. However, if the burst pressure is exceeded, the structural design of the pressure transmitter prevents filling oil leakage.
      • Versatile This measuring instrument distinguishes itself through its versatility. Various output signals, different process connections, materials for process connections, and sealing material are available. The standardized features are specified in the data sheet; further features can be implemented upon request.

      Applications

      • Use in aggressive media
      • Refrigeration technology
      • Compressors
      • Commercial vehicles
      • Hydraulics

    JUMO MIDAS SI OEM-Pressure Transmitter ( 401006 )

     6,000 12,000
     6,000 12,000 Select options