No products in the cart.
-
• Sensing distance: 4 to 22 mm • Flush and non-flush types • Power supply: 10 to 40 VDC • Output: Transistor • Make or break switching • Protection: Reverse polarity, short-circuit and transients • 2 m cable or plug M12 • Diameter: M12, M18, M30Carlo Gavazzi Inductive Type IA18DSN14DC, ( NPN NC ), 2-Wire
₨ 6,800 -
Upgrade your industrial sensing capabilities with the Carlo Gavazzi IA18ASN14NOM1 Inductive Sensor. Designed for precision and reliability, this M18 sensor with a 5mm range flush provides accurate proximity detection in a variety of applications. Whether you're in manufacturing, automation, or robotics, this sensor is engineered to meet your needs. Key Features:- Type: Inductive Sensor
- Size: M18
- Sensing Range: 5mm Flush
- Output: NPN NO (Normally Open)
- Connector: M12
Carlo Gavazzi Inductive Type IA30DSF15PO
₨ 5,800 -
- Sensing distance: 4 to 22 mm
- Flush and non-flush types
- Long and short body
- Rated operational voltage: 10 - 40 VDC
- Output: DC 200 mA, NPN or PNP
- Make switching function
- LED-indication
- Protection: reverse polarity, short circuit, transients
- Cable and plug versions
Carlo Gavazzi Inductive Type IA30DSN22PO, ( PNP NO ), M30
₨ 9,000 -
• Sensing distance: 2 mm • Flush type • Short and long body versions • Rated operational voltage (Ub): 10 - 36 VDC • Output: DC 200 mA, NPN or PNP • Normally open, Normally closed • LED indication for output ON • Protection: reverse polarity, short circuit, transients • Cable and M12 plug versions • According to IEC 60947-5-2 • Higher resistance to magnetic field • CSA certified for Hazardous LocationsCarlo Gavazzi Inductive Type ICB12SF02NO, ( NPN NO ), Sn: 2mm
₨ 5,500 -
Carlo Gavazzi Proximity Sensor Inductive, M12 Nickel-Plated Brass Short Housing, 4mm Flush, PNP NC Switching, Cable, 10-36VDC A family of inductive proximity switches in industrial standard nickel-plated brass housings. They are able to handle applications where high sensing range is requested. Output is open collector NPN or PNP transistors. General Characteristics
- Sensing distance: 4 to 8 mm
- Flush and non-flush types
- Short and long body versions
- Rated operational voltage (Ub): 10 - 36 VDC
- Output: DC 200 mA, NPN or PNP
- Normally open, Normally closed
- LED indication for output ON
- Protection: reverse polarity, short circuit, transients
- Cable and M12 plug versions
- According to IEC 60947-5-2
Carlo Gavazzi Inductive Type ICB12SF04PC, ( PNP-NC ), Sn: 4mm
₨ 5,500 -
• Sensing distance: 8 to 14 mm • Flush or non-flush types • Short or long body versions • Rated operational voltage (Ub): 10 - 36 VDC • Output: DC 200 mA, NPN or PNP • Normally open or Normally closed • LED indication for output ON • Protection: reverse polarity, short circuit, transients • Cable or M12 plug versions • According to IEC 60947-5-2 • Laser engraved on front cap, permanent
Carlo Gavazzi Inductive Type ICB18L50N14NO, ( NPN NO ), Sn :14mm
₨ 7,800 -
Carlo Gavazzi Midi Industrial Relay with LED, Push with Arm & Flag, DPDT (2-form C), 8-Pin, Contact Rating: 10A, Coil Voltage: 230VAC. The RMI relay (relay mini-industrial) can be used for a wide range of industrial applications. Available in 2 change-over contact configuration. PCB, solder and plug-in terminals. General Characteristics- High switching power.
- Small size.
- 2 poles configuration.
- AC coils 6 to 230 VAC.
- DC coils 5 to 110 VDC.
- 3750 VAC dielectric coil to contacts.
- Standard with LED, Push with arm and Flag.
- IP40.
- Compliant with the CE low voltage directive.
- TUV, UL, CSA, IMQ approved.
Carlo Gavazzi Relay Midi Industrial 10A 8-Pin RMIA210230VAC
₨ 1,200 -
- Time ranges: 0,15 s to 600
- Automatic start after drop out of power supply
- Knob-adjustable time within range
- Repeatability deviation: ≤ 1%
- Output: 10 A SPDT relay
- Plug-in type module
- Scantimer housing
- LED-indication for supply on
- AC or DC power supply
Carlo Gavazzi | Scantimer Time Delay Relay 24VDC, 120VAC & 220VAC
₨ 1,600 -
CEM-C6 is a single-phase electrical energy meter that can measure up to 100 A, is capable of measuring energy in two directions and has Class 1 accuracy. In addition, the meter features a built-in RS-485 / Modbus RTU communication system.Circutor Direct Single-phase Energy Meter CEM-C6 ( RS-485 )
₨ 12,000 -
Drive equipment sensor switch ZE202 series (ZE202B)SMC | Drive Equipment Sensor Switch ZE202A
₨ 4,000 -
Drive equipment sensor switch ZE202 series (ZE202B)
SMC | Drive Equipment Sensor Switch ZE202B
₨ 4,000 -
Characteristics
- 14.2mm Led display
- Selectable thermocouple types
- PID control function with accurate self-tuning
- Soft-Start function
- Selectable SSR or relay control output
- C/A2 Relay output can be set as secondary alarm or temperature control
- A1 Relay output can be used as primary alarm
- Offset feature for input
- In case of sensor failure, manual control can be selected
- CE marked according to European Norms
ENDA Digital PID Temperature Controller ( ET4402-230VAC )
₨ 14,000 -
Features:
- 96x96mm sized.
- 3,5 inches TFT , graphic and 5 digit display.
- Selectable TC, RTD, NTC, R, mA, V or mV inputs.
- Input offset feature.
- 32 point linearization for analog inputs.
- Selectable relay, SSR,motorized valve or analog outputs.
- Selectable , input proportional transmitter output(mA or V).
- 50ms sampling time.
- PID control.
- PID selftune.
- PID auto-tune
ENDA EPC Series Programmable Profile Controller ( EPC9513 )
₨ 85,000 -
Out Of Stock
Characteristics
- Dual setpoint value can be selected.
- PT100 ,J, K, L, T, S, R sensor (thermocouple) types can be selected.
- 0-20mA, 4-20mA, 0-10V, 2-10V, 0-25mV and 0-50mV input selections.
- Auto calculation for PID parameters (SELF TUNE).
- Three different feature can be assigned to digital input.
- Three different feature can be assigned to F function key.
- Soft-Start feature.
- Analogue, SSR or Relay Output Control selection.
- 0-20mA and 4-20mA Analogue Output Control selection.
- Up to 16 steps Profile Control.
- A1 Relay output programmable as first Alarm or Cooling control output.
- C/A2 Relay output can be used as second Alarm or Temperature Control output.
- Heating/Cooling control selection.
- Zero point input shift
- In case of sensor failure, periodically, auto-periodically running or relay state can be selected.
- RS485 Modbus RTU communication protocol feature (Specify at order).
- CE marked according to European Norms.
ENDA EUP PID UNIVERSAL CONTROLLER ( EUP-4420-UV-RS )
₨ 28,000 -
Characteristics
- Dual setpoint value can be selected.
- PT100 ,J, K, L, T, S, R sensor (thermocouple) types can be selected.
- 0-20mA, 4-20mA, 0-10V, 2-10V, 0-25mV and 0-50mV input selections.
- Auto calculation for PID parameters (SELF TUNE).
- Three different feature can be assigned to digital input.
- Three different feature can be assigned to F function key.
- Soft-Start feature.
- Analogue, SSR or Relay Output Control selection.
- 0-20mA and 4-20mA Analogue Output Control selection.
- Up to 16 steps Profile Control.
- A1 Relay output programmable as first Alarm or Cooling control output.
- C/A2 Relay output can be used as second Alarm or Temperature Control output.
- Heating/Cooling control selection.
- Zero point input shift
- In case of sensor failure, periodically, auto-periodically running or relay state can be selected.
- RS485 Modbus RTU communication protocol feature (Specify at order).
- CE marked according to European Norms.
ENDA EUP PID UNIVERSAL CONTROLLER ( EUP-8420-UV-RS )
₨ 38,000 -
Characteristics
- Dual setpoint value can be selected.
- PT100 ,J, K, L, T, S, R sensor (thermocouple) types can be selected.
- 0-20mA, 4-20mA, 0-10V, 2-10V, 0-25mV and 0-50mV input selections.
- Auto calculation for PID parameters (SELF TUNE).
- Three different feature can be assigned to digital input.
- Three different feature can be assigned to F function key.
- Soft-Start feature.
- Analogue, SSR or Relay Output Control selection.
- 0-20mA and 4-20mA Analogue Output Control selection.
- Up to 16 steps Profile Control.
- A1 Relay output programmable as first Alarm or Cooling control output.
- C/A2 Relay output can be used as second Alarm or Temperature Control output.
- Heating/Cooling control selection.
- Zero point input shift
- In case of sensor failure, periodically, auto-periodically running or relay state can be selected.
- RS485 Modbus RTU communication protocol feature (Specify at order).
- CE marked according to European Norms.
ENDA EUP PID UNIVERSAL CONTROLLER ( EUP-9420-230-RS)
₨ 38,000