No products in the cart.
-
Compact Photoelectric Sensor with Stainless Steel Housing E3ZM- Strong resistance against detergents, disinfectants, and jet liquid flow.
- Product lineup includes BGS Reflective Models and Through-beam Models with built-in slits.
Through-beam type, Sensing distance 15 m, Light-ON/Dark-ON selectable, PNP, Pre-wired models (2 m), Infrared LED (870 nm)
Omron Sensor Through Beam Type E3ZG-T81
₨ 22 -
Compact Photoelectric Sensor with Stainless Steel Housing E3ZM
- Strong resistance against detergents, disinfectants, and jet liquid flow.
- Product lineup includes BGS Reflective Models and Through-beam Models with built-in slits.
Through-beam type, Sensing distance 15 m, Light-ON/Dark-ON selectable, PNP, Pre-wired models (2 m), Infrared LED (870 nm)
Omron Sensor Through Beam Type E3ZG-T82
₨ 10,500 -
- surface with through-holes mounting - IP67 - rated for -25...+55°C ambientOmron Sensor Through Beam Type E3Z-T81AK-M1J
₨ 11,500 -
Photoelectric sensor, rectangular housing, stainless steel, oil-resistant, infrared LED, through-beam, 15 m, PNP, Light-ON/Dark-ON, M12 pigtail Smartclick connector, 0.3 m
Omron Sensor Through Beam Type E3ZM-CT81-M1TJ
₨ 15,000 -
The Improved E3T Series with Easier, Smoother Mounting and Installation
The case, nuts, and washers of the Cylindrical Sensors are all stainless steel, as are the mounting plates and sleeves of the M3-mounting Sensors. Harmful copper, zinc, and nickel plating are not used, enabling reliable application in rechargeable battery manufacturing lines. Stainless-steel screws are also available, for immediate application for rechargeable batteries. The series includes Through-beam, Long-distance (2 m) Sensors- Easy installation with M3-mounting Sensors
- Small Cylindrical Sensors for one-point mounting are also available
- Infrared Sensors added to the Series
Through-beam type, Sensing distance 500 mm, Light-ON, NPN, Pre-wired models (2 m), M2 mounting, Red LED (650 nm)
Omron Ultracompact, Ultrathin Through-beam type E3T-FT11
₨ 14,500 -
The Improved E3T Series with Easier, Smoother Mounting and Installation
The case, nuts, and washers of the Cylindrical Sensors are all stainless steel, as are the mounting plates and sleeves of the M3-mounting Sensors. Harmful copper, zinc, and nickel plating are not used, enabling reliable application in rechargeable battery manufacturing lines. Stainless-steel screws are also available, for immediate application for rechargeable batteries. The series includes Through-beam, Long-distance (2 m) Sensors- Easy installation with M3-mounting Sensors
- Small Cylindrical Sensors for one-point mounting are also available
- Infrared Sensors added to the Series
Through-beam type, Sensing distance 500 mm, Light-ON, NPN, Pre-wired models (2 m), M2 mounting, Red LED (650 nm)
Omron Ultracompact, Ultrathin Through-beam type E3T-ST13
₨ 12,000 -
Photomicro Sensor with built-in amplifier and attached cable reduces external light interference.- Light modulation effectively reduces external light interference.
- Wide operation voltage range: 5 to 24 VDC
- Easy operation monitoring with bright light indicator
The indicator is a GaP red LED (peak wavelength: 700 nm). The response frequency was measured by detecting the following rotating disk.Omron Slot-type Photomicro Sensor with Cable EE-SPX405-W2A
₨ 4,000 -
Global Standard Slot-type photomicro Sensors with 50- to 100-mA direct switching capacity.- Series includes models that enable switching between dark-ON and light-ON operation.
- Response frequency as high as 1 kHz.
- Easy operation monitoring with bright light indicator.
- Wide operating voltage range: 5 to 24 VDC
- Models in which the light indicator turns ON for dark-ON operation are also available.
- A wide range of variations in eight different shapes.
- Flexible robot cable is provided as a standard feature. *2
Dark-ON when the L terminal of the connector is opened, and light-ON when the L terminal and positive (+) terminal are connected. Do not connect the L terminal to 0 V when using dark-ON operation. When using light-ON, it is useful to select the connector EE-1001-1. The L terminal and positive (+) terminal of this connector are connected in advanceOmron Slot-type Photomicrosensor (Non-modulated) EE-SX670
₨ 4,000 -
Compact Pre-wired Photomicrosensor with Built-in Amplifier (Non-modulated) EE-SX91- Both light-ON and dark-ON outputs provided.
- A compact size and choice of five models for a wide range of applications.
- Compact NPN and PNP output models.
- Safer operation with built-in power supply reverse polarity protection.
- Output overcurrent protection with a thermal shutdown circuit (patent pending). *
- Mount using M3 or M2 screws.
- Indicator is visible in many directions for installation in any location.
- Flexible robot cables are standard on all models
Compact NPN and PNP Output Models Both NPN and PNP output models are available for use according to system requirements. Safer Operation with Built-in Power Supply Reverse Polarity Protection The built-in power supply reverse polarity protection protects against reverse connection of the power supply or outputs for safer operation at the assembly site.Omron Compact Pre-wired Photomicro sensor EE-SX910
₨ 4,000 -
Photoelectric Sensor with Built-in Amplifier E3S
- Adjusting the E3S-LS10XE4 Convergent-reflective Sensor
1. Attach the distance adjustment scale as shown in the figure and set it where the * mark is equal to the sensing distance. 2. Turn the distance adjuster until the red spot is at point (center of the distance adjustment scale). 3. Remove the distance adjustment scale once the distance has been adjusted. Put a sensing object in place, and then adjust the sensitivity.Convergent-reflective (wide vision field), Sensing distance White paper 50 x 75 mm: 50 to 250 mm, Light-ON/Dark-ON selectable, No-contact output, Pre-wired models (2 m), Infrared LED (945 nm)
Omron Sensor Convergent Reflective Type E3S-LS20XE4
₨ 18,000 -
Caution for Through-beam Type of E3JM
In order to get CCC and CE marks of certification, a design change was made for E3JM. The receivers and emitters of the former product and the redesigned product are not interchangeable. Using these products together could lead to operation failure. When either a receiver or an emitter needs replacement, please change both as a set. Look for the "N" suffix on the product code to indicate the new, redesigned version. Consult the table below for use of the former and redesigned receivers and emitters.Through-beam Sensors are sold in sets that include both the Emitter and Receiver. An order for the Emitter or Receiver alone cannot be accepted.
Omron Sensor Retro Reflective Type E3JM-10L
₨ 12,000 -
Caution for Through-beam Type of E3JM
- Excellent resistance against the water and oil. Easy application in locations with oil mist.
- Long-range sensing up to 30 m with Through-beam models.
- Shock resistance rated at 1,000m/s2.
- Product lineup includes metal M12 pre-wired connector models.
- NPN/PNP selector switch output.
Oil-resistant, Long-range Photoelectric Sensor with Metal Housing E3S-C
Omron Sensor Retro Reflective Type E3S-CR62
₨ 44,000 -
AMPLIF TIMER NPN OUTPUT RAIL-MT- Thin, Compact Head Saves Space and Mounts Closely. Built-in Interference Protection Provided.
- Input indicator on the Sensor Unit simplifies settings.
- Compact Head Amplifier-separated Photoelectric Sensor
Omron Inductive Block-Style Proximity Sensor, 2.5 mm Detection, NPN Output, 12 → 24 V dc, IP67Omron Compact Head Amplifier-separated E3C-JC4P
₨ 6,000 -
A new series of easy–to–use models for standard– and double–distance- Standard Sensors for detecting ferrous metals.
- Wide array of variations. Ideal for a variety of applications.
- Models with different frequencies are also available to prevent mutual interference.
- Superior environment resistance with standard cable made of oilresistant PVC and sensing surface made of material that resists cutting oil.
- Useful to help prevent disconnection. Cable protector provided as a standard feature.
Cylindrical Proximity Sensor E2ELOmron Sensor Inductive Type E2E-X1B2
₨ 8,000 -
Omron M8 Inductive Sensor E2E-X1R5F1-M1J
High-Performance Inductive Sensor for Precision Detection
The Omron E2E-X1R5F1-M1J is a top-tier M8 inductive sensor designed for accurate metal object detection in industrial environments. This compact and durable sensor ensures reliable operation, making it an ideal choice for automation and control applications.Omron | M8 Inductive Sensor E2E-X1R5F1-M1J
₨ 6,000 -
Inductive proximity sensor E2A-S was created and tested for applications in the harsh environment and at though vibration conditions with stainless body.- M8, M12, M18, and M30 housings with connector or pre-wired connection
- PNP or NPN output
- NO, NC, or NO+NC operation mode
Omron | Inductive Type, Stainless Steel E2A-S08KS02-WP-B1 2M
₨ 6,000